Worldwide Laser Demonstrates Laser Cutting Systems

For additional detail and information:
www.wlsc.com 480.892.8566 option 5 or e-mail info@wlsc.com

Videos of laser cutting can be seen here!

In these applications laser cutting systems from Worldwide Laser were used to laser cut materials in a production process as follows

  • 2-D bar codes were laser cut into a thick tape the 2-D codes are machine readable and can be used to identify products and to assist in production planning, counterfeiting prevention, and product identification for consumer protection, in this application a custom software package was written providing a user software interface allowing multiple jobs to be run over time without operator intervention. For this application a 50 watt Co2 laser with galvo head coupled with 200 mm focus lens and Worldwide Laser software was utilized. The roller and feeder systems used for this application is shown with other frames and stands at the end of this article.
  • In the case of laser cutting the lexan the laser cutting systems were used to produce the required design; the use of laser cutting systems for these applications eliminates the need for mechanical cutting systems or molds significantly reducing costs and providing a substantial positive environmental impact as laser cutting system reduce scrap and wasted material demonstrating how laser cutting systems from Worldwide Laser are eco friendly and allow industry to operate in environmentally friendly sustainable manner. In this application a 30 watt air cooled Co2 laser, galvo head coupled with 200 mm focus lens and Worldwide Laser controller software were used.

    • In these applications laser cutting systems from Worldwide Laser were used to laser cut various materials once again laser cutting systems decrease or eliminate scrap and damage to products caused by mechanical cutting and allow changes to cutting shapes and designs or products to be applied on the fly with the click of mouse eliminating the cost and expense of retooling and changing production systems, also because wasted product is greatly reduced or eliminated combined with the large reduction or elimination of airborne particulate and contamination the laser cutting system provide an eco friendly sustainable alternative for industrial applications. Contact the laser experts at Worldwide Laser for all your laser cutting system requirements. These specific application details are:

  • An LP8080 80 watt Co2 laser cutting system is used to degate plastic parts from an injection mold tree the laser cutting system consists of an air cooled 80 watt Co2 laser, galvo head with 300 mm focus lens, and Worldwide Laser controller software.
  • The next applications are both laser cutting materials in these cases a fabric for the pharmaceutical industry and paper card for the specially greeting and initiation card industry. The laser cutting systems used were 100 watt air cooled Co2 laser with galvo head coupled with 300mm focus lens and Worldwide Laser controller software

    • Shown here are --LP8100 -100 watt air cooled Co2 Laser cutting system with frame and stand/fixture for plastic part being laser cut -- LP8080 - 80 watt air cooled Co2 Laser cutting system with frame and stand designed to cut parts as they pass by on assembly line, frame designed to shield laser components & allow proper air flow for cooling --LP8050- 50 watt air cooled Co2 Laser cutting system with roller feeder for material such as labels or tape to be feed under the laser cutting system combined with custom software and user interface for easy operations with operator intervention These are examples of laser cutting systems with some stands, frames, and automation, in all these cases the laser cutting system replaced mechanical systems and significantly reduced or eliminated the scrap and rework rate the customers were experiencing, greatly increasing production thru put and also reducing product material costs along with providing significant positive environmental impacts.

    About Worldwide Laser

    Worldwide Laser headquartered in Gilbert Arizona and founded in July of 1986 builds laser cutting, laser marking, and laser etching systems types of systems are Co2, YAG, Fiber and UV. WORLWIDE LASER systems have wavelengths of 9300 and 10600 nm for Co2 1064 nm for YAG 1067 nm for fiber and 355 nm for UV

    WORLDWIDE LASER systems are either galvo head or fixed beam systems the lasers start at 10 watts up to 500 watts and can cut, mark and etch almost any products.

    WORLDWIDE LASER is one of the only remaining manufacturers of T.E.A. mask Co2 laser lasers the LP2000 series which can be driven either by spark gaps or thryatrons . In the mask T.E.A. business Worldwide Laser is one of the leading suppliers for new and refurbished parts or beam delivery components for Lumonics Laser Mark Series and also for refurbished Lumonics Laser Mark lasers. Co2 lasers from Worldwide Laser either sealed beam or T.E.A. Co2 can be utilized for high speed high quality laser marking or laser cutting.

    WORLDWIDE LASER provides the laser for integration to existing equipment/production lines or can design and build a complete turn key laser system to meet your company requirements.

    WORLDWIDE LASER has customers and offices in 10 countries in addition to the United States and a full range of product handling systems with technical support staff and installation engineers.

    WORLDWIDE LASER offers custom laser controller software & laser consulting WORLDWIDE LASER offers windows based laser controller software for our Co2, YAG, Fiber & UV laser systems.

    Financing available for WLSC clients

    Worldwide Laser offers the option to lease our laser cutting systems or any laser system for an online application follow this link http://www.paramountfinance.com/applications/worldwidelaser.php

    For additional detail and information www.wlsc.com

    www.wlsc.com — info@wlsc.com

    Voice 480.892.8566 option 5 — Fax 480.497.9661